Dunsborough Fence Panel

From $1,445.00 to $4,325.00

The Dunsborough Fence Panel continues the collections fine texture and balance.

Vertical square bars are topped with scroll flourishes, spear points and a knuckle feature to the lower section.

A mid-rail of spear and scroll texturing adds to the styles density and uniformity.

Source	This product is made to order at our Newcastle (AUS) workshop to your specifications
Frame Material	40x10 solid steel bar
Infill Material	12mm solid steel square bar
Coating	Hot dip galvanised, epoxy primed and top coated with polyurethane of your chosen colour
Hardware Inclusions	No hardware is included other than the product itself
Fulfilment	Made to order ~ 6 Weeks
Width Option	From 350 mm to 4000 mm
Height Option	From 600 mm to 1850 mm

Size For Pricing Width Up To 1.2m Width Up To 2m Width Up To 3m Width Up To 4m

$1,445.00 AUD

Locally owned and built

Fully welded steel

Approve before production

☑ Pickup available after manufacture

☑ Local delivery (up to 60km from Newcastle)

Estimated manufacture time 6 Weeks

To maintain the beauty and integrity of your purchase, we recommend regularly inspecting the action of the product.

Hinges (other than sealed bearing) should be lubricated atleast yearly.

Minor damages and chips to paint from wear & tear should be corrected with touch up paint to minimise corrosion

Locks which are becoming stiff should be correctly adjusted or lubricated to avoid damage

Your panel will be made to your specified size, within a 2mm tolerance.
Measure in a few spots between your posts or columns to check for variation.
Accurate width is crucial — incorrect measurements may mean the panel won’t fit. We can’t offer refunds for wrong sizes unless the item is faulty.
A tape measure works, but a laser measurer is ideal for best accuracy.
If using a tape, make sure it’s straight and held tight for a true reading.
If your columns aren’t level, measure to the shortest point.
Panels are fabricated square and level only.
Choosing "no feet" The panel will still have a standard gap underneath to match panels with feet of the same height.
For a snug fit, we suggest deducting 4mm — this allows a 2mm gap on each side, which is usually unnoticeable or can be caulked later if desired.